Electrical Tools & Equipment that Electricians Use

Most do it yourself electricians set out to complete a home repair or improvement task and are surprised to discover that professional electricians use a lot more tools and equipment than the average person possesses in their garage. Electricians are held to extremely high safety and professional standards and in order to complete an electrical task properly, all of the right tools and equipment must be available. 

In the article below we’ll walk you through a list of the most common tools and equipment used by professionally certified electricians. Continue reading through the article below for the complete rundown. 

A List of The 20 Most Common Tools and Equipment Used by Electricians 

1. Hard Hat – In most cases, an electrician won’t even be able to enter a worksite without wearing a hard hat. Falling construction debris can gravely injure a person. For that reason, electricians are never advised to do any type of work without wearing proper protection over their head. 

2. Electric Drill – One of the most frequent tasks that an electrician will be engaged in every day is drilling holes with a cordless electric drill. These cool gadgets are able to accommodate a wide variety of drill bits, making them extremely versatile and dynamic tools. 

3. Tape Measure – Ever wondered what’s in an electricians bag? Well, you’re almost guaranteed to find a tape measure. This age-old device is a standard piece of electrician equipment. Electrical work is highly detailed, as you will need to locate precise points only done through measuring out a distance. 

4. Pliers – Can you guess what’s in an electricians bag other than a tape measure? If you guessed pliers then you came up with the correct answer. This is one of the most frequently used tools that make up standard electrician equipment. Electricians cut wire and cables all day long, a task only done with pliers. 

5. Screwdrivers – Electricians cannot always depend on an electric drill for screwing in or loosening fasted hardware. This is especially true for tight areas where only a small screwdriver will fit. Electric drills are often times clunky and can only be used when lots of space is available. 

6. Level Device – When it comes to pinpoint electrical work, you absolutely need to make sure that vital hardware is level and fastened in the proper position. This can only be done by using a high-quality level device, without which an electrician’s job would be nearly impossible to conduct. 

7. Wire Strippers – Most wires handled by electricians are insulated with a special plastic coating. The only way to properly manipulate these wires while installing them is to strip off the ends of this insulation with a wire stripper. Wire strippers come in all different shapes and sizes. 

8. Fish Tape – If you plan to run electrical wire through conduits all the way through to gang boxes, then you cannot achieve this without the use of fish tape. This specialized electrical tape allows you to run wire and cable along pipes by pulling it out the other side as it is equipped with small hooks. 

9. Voltage Tester – Have you ever wondered how an electrician tests to see if a wire has electricity running through it or not. This can be done by using a voltage test. Voltage testers possess a small testing prod that allows you to get a positive or false electrical reading on anything that the prod touches. 

10. Conduit Bender – Electricians need to be able to install cable and wiring around corners and other sharp bends. In order to properly do this the conduit piping that houses the wire needs to be bent in accordance with the angle of any corner or curve in a building’s wall or structure. This can be done by using a conduit bender. 

11. Reaming Bit – In order to fasten or attach old and new wire conduits, electricians need to use reaming bits that can be used to widen the opening of a conduit. This allows one section of conduit to be firmly inserted into the other, thus allowing for a seamless attachment of the two pieces of wire piping. 

12. Flashlight – Contrary to what you might think, electricians, do not always work in environments with a lot of lighting. For this reason, they will often need to use a flashlight that is either handheld or attached to their hard hats. Without a flashlight, an electrician’s job can become very dangerous. 

13. Insulated Gloves – Electrical works always poses the risk of electrocution. That is why electricians use insulated work gloves that are created with specialized materials that do not conduct electricity. In the case where an electrician touches a live wire the electricity will not shock the individual. 

14. Flame Retardant Work Shirt – An electrical phenomenon that exposes electricians to severe injury are arc flashes. These arc flashes can easily cause fires, so it is very important for electricians to wear as much flame retardant clothing as possible. Most construction sites require that electricians wear such fire-proof attire. 

15. Safety Goggles or Glasses – Protecting the eyes is a major priority for every electrician. Construction debris, dangling wires, electric tools, all pose a huge risk to the eyes. Just like hard hats and flame retardant shirts, safety glasses are typically a mandated piece of safety equipment that every electrician must possess before they step on to a work or construction site. 

16. Rescue Hooks and Rods – These long rods can safely be used to move a person or object that has electrical current running through them. If an electrician or construction worker is electrocuted then a rescue rod or hook is going to be the primary tool used to pull this person away from the ongoing electrical current. 

17. Circuit Analyzers – These highly advanced handheld devices are able to give any electrician instant information about any circuit that a particular outlet is connected to. The information that these devices displays include voltage, reversals, polarity, wire voltage, and much more. 

18. Circuit Finders – As any electrician will tell you, it can be extraordinarily difficult to locate a circuit. Thankfully, every electrician can use a gadget known as a circuit finder. By attaching the device to an outlet, an electrician can find out exactly which circuit the outlet is connected to. 

19. Duct Tape – You won’t find an electrician without a roll of duct tape in his or her utility bag. This universal item can be used in just about any situation needing a quick fix, such as temporarily holding electrical hardware in place while more secure screws or nails are driven in. 

20. Tool Pouch – Electricians need to keep their bodies very mobile, which is why most of them prefer a tool pouch over a toolbox. Tool pouches are typically worn against the chest and are secured by straps that run over the shoulders. 

Hire a Skilled Certified Electrician to Safely Do The Job For You 

It can be dangerous to do home electrical repairs yourself, as more often than not you will not have the tools or knowledge needed to do the job properly. As any electrician will tell you, it is far better to allow a trained professional to do the job for you. Saving a small amount of money on DIY fixes and repairs can end up putting you and your family at risk of incurring a grave injury, so don’t take unnecessary chances. Contact Miami Electric Wizards today for professional residential electrical services.

Link References 

https://www.servicetitan.com/blog/best-electrician-tools 
https://www.electrical-online.com/electrical-tools-and-equipment/ 
https://www.ecmag.com/section/your-business/tools-most-used-electricians