popadmin, Author at Miami Electric Wizards

popadmin

Types of Electrical Damages That Can Occur In South Florida

March 7, 2019 popadmin

South Floridians are no strangers to electrical disasters. They are survivors who fight for their rights to live in a warm climate that boasts year-round sunshine and coastal clear waters set off by pristine sandy beaches. In South Florida, electrical disasters of some sort happen throughout the year and many are due to natural weather conditions. The types of damages, associated costs, and ways to avoid electrical problems vary greatly.

Electrical house or building problems from fire and rainstorms

Short circuits are a cause of fires in residential homes and commercial buildings. When the power goes out after a storm and water saturates electrical wiring, a fire can start. Back in September 2017, a fire ruined Lee Elementary School after an electrical surge. According to a Tampa Bay Times article the district turned down an offer of $9.2 million considering it to be too low to repair the school.

To lessen the chances of electrical damage after a storm turn off appliances when the power goes out, even better, turn off the main breaker. Turn the main breaker back on after power restoration. Listen for unusual noises and keep your nose sensitive to odd smells. If you hear or smell something strange, turn the breaker off again and call an electrician to access the situation. If you see flickering lights, unplug all appliances so they will not burn out.

During a storm, high winds and trash encounter the electrical lines from the home or building to the utility pole. The wires still have an electrical charge so remember not to touch them. Check for downed wires outside and contact your electric company if you see exposed or broken wires.

Incorrectly hooked up generators can start fires as well. It is hazardous to use dryer appliance cords as they could permanently damage the generator, spark a fire, and pose a danger of electrocution.

Heat waves and High Humidity Weather

Heat waves cause electrical power fluctuations. Electrical damages from heat waves and humidity include damage to appliances when they strain and stay on longer than normal. A refrigerator’s dirty condenser coils can damage its compressor. To avoid electrical problems, read the user manual that came with the appliance to determine where the condenser coil is located and then clean it on a regular basis.

Be safe when the outdoor temperature rises to 135 degrees Fahrenheit because that high of a temperature is dangerous. Parked cars are no place to be for children or adults. In a heat wave or high humidity situation, drink plenty of water unless you are on a water-restricted diet. Consult your physician in that case. Always wear lightweight light-colored clothing to keep cool and limit outdoor activities.

Tornado Damage and Safety

Tornadoes are common in South Florida. Electrical damage occurs when high winds blow down power lines. The best thing to do is to stay alert of weather conditions during tornado-prone months, which are between June and September. Keep in mind tornadoes do happen year round.

The National Centers for Environmental Information National Oceanic and Atmospheric Administration (NOAA) tracks widespread damage was severe weather. It indicated that tornado and hailstorms in March and April 2018 caused more than $2.8 billion dollars in damage. Florida was among the states listed who suffered from the impact.

Electrical damages during a tornado are hard to prevent. Your main goal is to stay away from downed wires. Assign a room as a family safe room to retreat to in the event of a tornado. Alternatively, identify community safe buildings where people gather during a tornado. Look at the sky and note the changes in the weather. Sometimes a tornado can strike with little warning.

Hurricane Damage and Prevention

Hurricane Irma caused the massive storm that resulted in the initial power outage for Tampa Bay’s Lee Elementary School prior to the fire that subsequently damaged the school. Estimates of the damages from Hurricane Irma are $50 billion. Total damages from that hurricane plus Hurricane Harvey and Katrina to the states of Florida, Texas, and New Orleans range between $150 billion and $200 billion.

The Federal Insurance and Mitigation Administration (FEMA) gives steps on how residents in South Florida and other areas can do what they can to protect your homes from hurricanes. They suggest residents have a generator installed because outages may last several days. Follow all of the manufacturer’s guidelines when installing and operating your generator. Invest in storm shutters. Either make them out of 5/8 inch thick plywood that is an exterior grade or purchase shutters made of steel, aluminum or wood. During high winds use galvanized metal hurricane straps to hold down rooftops to walls. It is best to call on a professional put those in due to their reported difficulty to install.

You will not likely be able to bypass damages entirely from hurricanes if you reside or work in areas more susceptible to them. However, simply by taking some advanced precautions, you might be able to limit the amount of damage your home or building sustains.

Electrical Damages Lasts for Weeks after a Hurricane

After Hurricane Michael hit the Florida Panhandle in October 2018, Duke Energy estimated the restoration of electrical power to be around 14 days. Certain counties extended that out even further to 30 days. Crushed power grids needed repair. Building structures, if too broken, would not be able to have power restored. Hurricanes on their path of destruction affect the way of life for many.

The Homeowner is Responsible for Certain Electrical Equipment

A homeowner’s responsibility is the meter box attached to the house. Many electric companies offer surge protection service for an extra monthly fee to cover parts of the meter. The service typically covers a maximum of $3,000, but it varies by program. Common parts under the coverage are the conductor cable that costs a little more than $1,100, and the weatherhead, a part shaped like a bell, would be slightly under $200. The homeowner pays nothing if under the coverage.

Electrical damage can occur at anytime a hurricane, tornado, heat waves, and other natural disasters take place. The cost often exceeds $1 billion and that is tremendous. Preparation is the key to lowering the costs of damages.

Floridians rebuild because the beauty of South Florida is like non-other in the United States. Year round warm weather, entertainment, close proximity to beaches and the ocean all make living in South Florida and visiting it worthwhile.

Electrical Tools & Equipment that Electricians Use

February 18, 2019 popadmin

Most do it yourself electricians set out to complete a home repair or improvement task and are surprised to discover that professional electricians use a lot more tools and equipment than the average person possesses in their garage. Electricians are held to extremely high safety and professional standards and in order to complete an electrical task properly, all of the right tools and equipment must be available.

In the article below we’ll walk you through a list of the most common tools and equipment used by professionally certified electricians. Continue reading through the article below for the complete rundown.

A List of The 20 Most Common Tools and Equipment Used by Electricians

1. Hard Hat – In most cases, an electrician won’t even be able to enter a worksite without wearing a hard hat. Falling construction debris can gravely injure a person. For that reason, electricians are never advised to do any type of work without wearing proper protection over their head.

2. Electric Drill – One of the most frequent tasks that an electrician will be engaged in every day is drilling holes with a cordless electric drill. These cool gadgets are able to accommodate a wide variety of drill bits, making them extremely versatile and dynamic tools.

3. Tape Measure – Ever wondered what’s in an electricians bag? Well, you’re almost guaranteed to find a tape measure. This age-old device is a standard piece of electrician equipment. Electrical work is highly detailed, as you will need to locate precise points only done through measuring out a distance.

4. Pliers – Can you guess what’s in an electricians bag other than a tape measure? If you guessed pliers then you came up with the correct answer. This is one of the most frequently used tools that make up standard electrician equipment. Electricians cut wire and cables all day long, a task only done with pliers.

5. Screwdrivers – Electricians cannot always depend on an electric drill for screwing in or loosening fasted hardware. This is especially true for tight areas where only a small screwdriver will fit. Electric drills are often times clunky and can only be used when lots of space is available.

6. Level Device – When it comes to pinpoint electrical work, you absolutely need to make sure that vital hardware is level and fastened in the proper position. This can only be done by using a high-quality level device, without which an electrician’s job would be nearly impossible to conduct.

7. Wire Strippers – Most wires handled by electricians are insulated with a special plastic coating. The only way to properly manipulate these wires while installing them is to strip off the ends of this insulation with a wire stripper. Wire strippers come in all different shapes and sizes.

8. Fish Tape – If you plan to run electrical wire through conduits all the way through to gang boxes, then you cannot achieve this without the use of fish tape. This specialized electrical tape allows you to run wire and cable along pipes by pulling it out the other side as it is equipped with small hooks.

9. Voltage Tester – Have you ever wondered how an electrician tests to see if a wire has electricity running through it or not. This can be done by using a voltage test. Voltage testers possess a small testing prod that allows you to get a positive or false electrical reading on anything that the prod touches.

10. Conduit Bender – Electricians need to be able to install cable and wiring around corners and other sharp bends. In order to properly do this the conduit piping that houses the wire needs to be bent in accordance with the angle of any corner or curve in a building’s wall or structure. This can be done by using a conduit bender.

11. Reaming Bit – In order to fasten or attach old and new wire conduits, electricians need to use reaming bits that can be used to widen the opening of a conduit. This allows one section of conduit to be firmly inserted into the other, thus allowing for a seamless attachment of the two pieces of wire piping.

12. Flashlight – Contrary to what you might think, electricians, do not always work in environments with a lot of lighting. For this reason, they will often need to use a flashlight that is either handheld or attached to their hard hats. Without a flashlight, an electrician’s job can become very dangerous.

13. Insulated Gloves – Electrical works always poses the risk of electrocution. That is why electricians use insulated work gloves that are created with specialized materials that do not conduct electricity. In the case where an electrician touches a live wire the electricity will not shock the individual.

14. Flame Retardant Work Shirt – An electrical phenomenon that exposes electricians to severe injury are arc flashes. These arc flashes can easily cause fires, so it is very important for electricians to wear as much flame retardant clothing as possible. Most construction sites require that electricians wear such fire-proof attire.

15. Safety Goggles or Glasses – Protecting the eyes is a major priority for every electrician. Construction debris, dangling wires, electric tools, all pose a huge risk to the eyes. Just like hard hats and flame retardant shirts, safety glasses are typically a mandated piece of safety equipment that every electrician must possess before they step on to a work or construction site.

16. Rescue Hooks and Rods – These long rods can safely be used to move a person or object that has electrical current running through them. If an electrician or construction worker is electrocuted then a rescue rod or hook is going to be the primary tool used to pull this person away from the ongoing electrical current.

17. Circuit Analyzers – These highly advanced handheld devices are able to give any electrician instant information about any circuit that a particular outlet is connected to. The information that these devices displays include voltage, reversals, polarity, wire voltage, and much more.

18. Circuit Finders – As any electrician will tell you, it can be extraordinarily difficult to locate a circuit. Thankfully, every electrician can use a gadget known as a circuit finder. By attaching the device to an outlet, an electrician can find out exactly which circuit the outlet is connected to.

19. Duct Tape – You won’t find an electrician without a roll of duct tape in his or her utility bag. This universal item can be used in just about any situation needing a quick fix, such as temporarily holding electrical hardware in place while more secure screws or nails are driven in.

20. Tool Pouch – Electricians need to keep their bodies very mobile, which is why most of them prefer a tool pouch over a toolbox. Tool pouches are typically worn against the chest and are secured by straps that run over the shoulders.

Hire a Skilled Certified Electrician to Safely Do The Job For You

It can be dangerous to do home electrical repairs yourself, as more often than not you will not have the tools or knowledge needed to do the job properly. As any electrician will tell you, it is far better to allow a trained professional to do the job for you. Saving a small amount of money on DIY fixes and repairs can end up putting you and your family at risk of incurring a grave injury, so don’t take unnecessary chances. Contact Miami Electric Wizards today for professional residential electrical services.

Link References

https://www.servicetitan.com/blog/best-electrician-tools
https://www.electrical-online.com/electrical-tools-and-equipment/
https://www.ecmag.com/section/your-business/tools-most-used-electricians

Residential electrical maintenance goals for 2019

January 18, 2019 popadmin

It’s the start of a new year. And, you know what that means. It’s time to make some resolutions and set some goals to improve some aspects of your life. While resolutions are usually about something like quitting smoking or dieting, you could also think about some goals for your home, maybe even some electrical maintenance goals. How about investing a little effort into making sure that all of the electrical components of your home are in tip-top shape?

One of the leading causes of fires in the home is because of an electrical malfunction. It could be a wiring issue, a faulty appliance, or even something that you’re doing, unwittingly creating a hazard. While a smoke alarm will alert you and your family to a fire, it won’t save your home or your possessions from the devastation.

One of the best ways to prevent a fire caused by your electrical system is to have a preventative maintenance program set up. A professional electrician can put a scheduled plan together based on the particular components of your home. Here are just some of the things an electrician can do for you to help you achieve your electrical maintenance goals year, and make your home safer for you and your family.

Smoke Detectors

If you have a smoke detector that runs on batteries, you are already in the habit of checking it every so often to make sure that the batteries are still good. But, if you think about it, you’re putting an awful lot of trust in a battery and a test button. You could consider having your smoke detector hard-wired to your electricity, so there’s no chance of a battery dying without you being aware of it. A skilled electrician can easily install one, as well as keeping tabs on its condition during an annual electrical inspection.

Carbon Monoxide Detectors

The same would apply to carbon monoxide detectors. You could improve their reliability by having them installed instead of running on a battery or a plug.

Ceiling Fans

Of course, you’d have a ceiling fan installed by a certified electrician. But, once it’s up there, it actually takes quite a bit of abuse. The constant motion of the fan can cause screws to loosen, and can sometimes affect the integrity of the wiring. Faulty wiring anywhere in your home isn’t something that you want to take chances with. Having them on your preventative maintenance program would keep them operating safely.

Switches and Outlets

The maintenance of the wiring inside of your walls should only be done by a professional electrician. Over time, the wires and circuits can become compromised, either from age or some other factor. You’ll usually notice flickering lights, or lights dimming on their own. The same thing can happen with your electric wall outlets. Some switches and outlets may even stop functioning altogether. An annual maintenance check will test each of these areas and make sure there aren’t any fire hazards.

Lighting

Those same wires behind your walls and ceilings are connected to your overhead lights. They would also be checked during a routine maintenance program to make sure that they are operating safely and efficiently. Your electrician can even give you some useful recommendations of energy-saving bulbs for your fixtures, as well as suggestions for dimmers and other gadgets that can save you money on your utility bills.

Generators

If you have a back-up generator for your home, you’ll definitely want it included on your maintenance program. Hopefully, it doesn’t have to kick on very often. But, you certainly want it to be ready and able to handle your home’s electrical needs when the time comes. An electrician will perform all of the necessary tests on the generator, and its access points, to make sure it is ready to go in case of an emergency with your home’s power supply.

Appliances

Your electrician can also check out all of the wiring and connection points for the various appliances in your home. Some appliances are plugged into outlets, and some, like stove-tops, ovens, and dishwashers are hard-wired to your main electrical panel. As with anything, over time, those wires and terminals can get frayed and corroded. Having them inspected, and repaired or cleaned, will extend the life of the appliance and make it safer for your home.

Surge Protection

Another common cause for house fires is having too many things plugged into outlets, or even worse, overloading extension cords. Designed for short term use only, extension cords can overheat and catch fire if there are too many things plugged into them or in the event of a power surge. And, outlets are only designed to conduct a certain amount of electricity safely.

A surge protector will protect your outlets, and anything that is plugged into them, in the event of a sudden surge of electricity from your power company. They will also reduce the risk of fire hazards caused by overloading outlets or using extension cords. You can either have one with several points of access that is plugged into the electric outlet. Or, you can have a whole-house surge protector, which is installed at the meter or in the main electric panel, and will control the surge before it gets a chance to enter your home. A professional electrician will be able to easily advise you of the best surge protector for your home, as well as include its maintenance in the scheduled routine.

Main Electrical Panel

This in one area that you only want a qualified electrician to touch. It controls all of the electricity that flows through your home. It’s composed of a combination of breakers, fuses, wires, conduits, and circuits that will need some maintenance occasionally. Being proactive and having your main electrical panel included in your yearly preventative maintenance schedule can avoid an electrical emergency when you least expect it.

Sub Panel

Your home may have a sub panel in addition to the main electrical panel. It’s basically a smaller version of the main panel, with many of the same components, and only controls certain areas in your home. It would also be included in your yearly proactive routine.

Home Security Systems

If your home has a home security system, some of the parts and sensors will be located outdoors. Even though the wiring is designed to withstand the elements, the factors of both time and abuse can cause the wiring to suffer, creating a potential hazard. This is just another aspect of your home’s electrical system that could be included in your maintenance program.

Other Home Components

The major mechanicals of your home like your furnace, air conditioner, and water softener all have a connection point where the electricity is attached. Inspecting these access sites could also be a part you your preventative maintenance plan, giving you more confidence in their continued performance.

Achieving your electrical maintenance goals for this year is easy, as long as you have a proactive plan in place. The biggest advantage of any preventative maintenance program is the peace of mind it will give you, because you’re fully knowledgeable about every aspect of your home’s performance. Not only are you making sure that the life of every component in your home is maximized, but you are also making sure that your home is a safe environment for you and your family.

What to do when your circuit breaker trips in Miami — and what not to do

November 26, 2018 popadmin

Breaking circuits are fairly common. Most people panic when they happen. Electricity is not something that you can play around with especially when it is having issues. It carries a significant amount of danger to the users.

A tripping circuit can easily cause a fire. It can also destroy your electronic appliances. It is not advisable to try diagnosing the system if you don’t have the expertise. In this article, you will learn what to do and what not to do when a circuit breaker trips.
A circuit breaker is an electrical device that prevents excessive electricity from flowing to your home appliances. A circuit breaker can trip because of any of the following reasons:

Short-circuiting: This happens when the live wire, also known as the hot wire, interacts with the neutral wire.
Circuit overloads: It happens when you load a circuit with more power than it can handle.
Ground fault surges: They happen when there are wiring errors or damages that cause the ground wire to touch the hot wire.

What do you do when the circuit breaker trips?

As noted, a tripping circuit breaker is an indicator of other problems within the electrical unit. You cannot force the circuit. Some people try to hold on to the switch to prevent it from snapping. That is not a good idea.
If you do so, the system will heat to a point where it melts all the surrounding parts. Once they melt, the wires will come into contact. Your actions will destroy the whole panel. If the power surge is significantly high, the system can explode. You will end up hurting badly.

Do this when you have a circuit breaker problem:

Disconnect Your Power from the Main

Instead of trying to power it on again to confirm the circuit is tripping, power off the electricity. Doing so will ensure that you are safe.
You will be safe; you will spare the system, and the risk of causing more problems will reduce. Switch off all electrical appliances connected to the switch. Do not use devices connected to the circuit. The electrical devices that you are using at home can cause problems with the circuit breaker.

Begin the Process of Finding a Reliable Electrician

Once you have taken the precaution, you can begin the process of hiring a professional. Electrical faults do not come singly; they tend to come in pairs. Identify any other electrical fault that you would like fixed. Write down all the electrical issues. If you need to make any upgrades to energy efficient appliances or products, this can be a good time.

What to look for in an electrician

1. Professionalism

Any contracting job in a home setting requires a person you can connect at a personal level. The electrician will work inside your compound for some time. It may just be an hour, but you need someone you are comfortable with when they are around. When looking for professionalism, look out for a person who dresses the part, keeps communication formal, and prepares professional bids or quotes.
A good electrician has the tools and equipment to do all general electrical issues. If someone does not have essential tools, they will struggle to deliver quality at the appointed time. You will end up with a bad experience. Even if you give them the job, they will not inspire confidence and peace of mind. You will have niggling doubts about the quality of the work.

2. Insurance

As said, electrical faults carry a significant amount of danger. The electrician should invest in protective gear and tools of work. On top of that, he should have a workers compensation insurance. In case of a work-related accident, the liability will not be on you.
An insurance coverage shows that the electrician takes his or her work seriously. Some will go further and have work-related insurance. In case of any work-related damages, the coverage will take care of the bill.

3. Licenses

You need a permit to offer electrical services in Miami. There are three types of permits, apprentice, journeyman, and contractor/master electrician license. Each one of them shows the level of expertise and experience.
Only professional people have licenses to operate. A person is qualified to deal with circuit breaker trips in Miami if he meets the electrician’s guidelines for the city. You can have complete faith in a licensed technician.

4. Experience and Consequent Reviews

Every contractor should give you a portfolio that you can use for referrals. Those that have websites or social media accounts are good because you can check their online reviews. If they do not have any online presence, you can use phone calls to ask former clients about their experience with the electrician.
The number of jobs that someone has done can be deceptive. The satisfaction rate can be a better indicator of the electrician’s skillset. It tells you that that the person will do everything in their power to deliver.

5. Standard Rates

Electricians charge hourly. Focus on the craft. Do not dwell on the lowest dollar-rate. An electrician who takes time to prepare you for the appointment can charge more per hour and still deliver the best experience. It takes time to access the panel in some homes. If you can make it accessible before the electrician arrives, you will save a couple of minutes. Your circuit breaker problems may not take a lot of time to fix, but you sure want the experience to be ideal.

6. Interview At Least Three People

For your circuit breaker trips in Miami, you should interview electricians that are nearest to your location. They will take less time to reach your premises, which will translate to value for money in the first hour. They will not take 20 minutes to get to your place. During the interviews, you can request to see licenses, certifications, insurance, and the portfolio.

Conclusion

Now you know what to do and what not to do when a circuit breaker trips. A professional will help you fix all your circuit breaker problems. All you have is to hire a skillful electrician near you.

4 Ways to Prepare for a Blackout

July 10, 2017 popadmin

It is important to be prepared for when and if your utilities stop working. The reason for this is that when power outages occur, they can cause many unsafe situations if you are not prepared. If you are residing in Miami, then it is best to meet with an electrician in Miami in order to create a blackout emergency plan for your home. By working with a Miami electrician, you will find that you have an incredible expert working to keep your home safe. Here are four ways to prepare for a blackout:

1. Have a First Aid Kit Ready: A first aid kit is vital in the event that you or one of your family members gets hurt. Be sure that you keep one accessible so that you know exactly where it is should you need it.

2. Purchase a Flashlight: Having a flashlight with fully charged batteries is another very important asset. Keep the flashlight near your front door and in your bathroom to make it accessible in your home.

3. Obtain Candles: Candles are a good strategy to light up to illuminate the dark rooms of your home. Should you have to wait for a long time, the candles will make your wait far more pleasant than sitting in the dark.

4. Have Sneakers Ready: Sneakers are something that are wise to have ready because you may have to walk in an area that is slightly darker than usual. If you have sturdy shoes, you will be able to make your way to the generator without any further problems.

It is quite important that you take the time to plan your safety in the event of a blackout. Doing so will put you in an ideal position to resolve the blackout and then go on with your daily schedule.

4 Practical Uses for an Electrician in the Greater Miami Area

July 3, 2017 popadmin

It is always beneficial to have an electrician by your side when you are a homeowner in Miami. There are many sudden repairs that may come up requiring you to send for an electrician in Miami. Additionally, if you maintain your home regularly, you will find that you will have a great deal of success in reducing your electric bill because you will spot issues before they become expensive by using a Miami electrician. Here are four practical uses for an electrician in the greater Miami area:

1. Wire Connectivity: Electricians will be able to assist you with connecting the wires that you desire. This will save you certain outlets and/or appliances failing to work properly.

2. Generator Maintenance: Maintaining the generator is important. This way, you can be sure that it will be working in the most effective way to keep your family safe and your home well lit.

3. Black Out Response: If there should be a problem in your neighborhood, having the number for an electrician is a great way to reduce the time that you are without power.

4. Sustainable Energy Practices: If you are interested in learning how to save money on your electric bill through efficient energy use, then it is also useful to speak with an electrician. Their knowledge will enlighten you with viable ways to save capital.

It is important to work with your local electrician in order to be safe, have repairs made, and save capital on your electric bill. Be sure to learn where your local electrician is so that you are able to have them on speed dial should you need their assistance. This way, you can be certain that your home will be safer from electric hazards that happen in the course of being a homeowner in Miami.

4 Useful Tips to Reducing Your Electric Bill Overall

June 26, 2017 popadmin

There is a tendency to utilize too much capital on one’s electric bill. This primarily happens due to lack of research and what the potential methods are to save capital on one’s electric bill. If you are residing in Miami, it is important to research how to save on your electric bill or consult a Miami electrician in order to better budget your expenses. Here are four useful tips to reducing your electric bill overall:

1. Have a White Roof: In a recent survey, buildings that have black roofs utilize 40% more energy than those that do not. This is something that has the potential to make a major difference in the amount that you have to payout for your electric bill.

2. Use a Reusable AC Furnace Filter: It can often cost you more in electricity if you have a filter that is not clean. Be sure that you have this cleaned on a regular basis for your furnace and you will see a major reduction in the amount that you have to pay monthly.

3. Upgrade your Appliances: Upgrading your appliances will allow you to have access to “green mode.” This is a new offering available for individuals that will force your appliance to have a feature to save you money and to help the environment as well.

4. Fill Cracks in Your Home: If you constantly fill the cracks, you will be able to let less air escape. This will lower your electric bill over time because less air will be escaping from the cracks.

It is important to assess ways to lower your electric bill on a regular basis. Since the technology is constantly changing, you will find yourself having a great deal of success if you stay informed about current technologies that could save you a great deal of capital in the long term. Being a responsible utility user will allow you to greatly lower your electric bill overall.

3 Ways to Improve the Electricity in Your Miami Home

June 19, 2017 popadmin

There are many innovations that are periodically occurring in the technology sector. These innovations also include electricity. For this reason, it is best that you regularly meet with an expert in Miami in order to discuss current electric issues in your home and how to improve them. Here are three ways to improve the electricity in your Miami home:

1. Be Receptive to Technology Advancements: Technology is always adapting. It is important to be receptive to the developments and see how they can benefit your home. This will allow the electricity in your home to operate efficiently and effectively.

2. Work with an Electrician in Miami: Having a Miami electrician will allow you to learn about which electrical solutions are ideal for Miami residents. Once you learn from a local expert, you can decide which items you would like to invest in for your home.

3. Be Open to Spending More: At times, it is important to invest in order to reap rewards. It is highly recommended that you are receptive to upgrading the electrical items in your home that have become out of date and understand that there may be financial investment involved. Keeping an open mind will help you to have a home that is electrically efficient.

It is important that you are regularly meeting with an electrician to see how to improve the situation in your home. If you are able to do this, you will learn about many new valuable advancements in the industry that will benefit your home’s efficiency. Thus, be sure to take the time to meet with local experts. You will find that their expertise will prove to be quite valuable for your home remaining both efficient and up-to-date as time passes on. Thinking in this way will also allow you to keep the value of your home high in the event that you want to sell your property down the road.

3 Common Causes for Power Outages in Residential Homes

June 12, 2017 popadmin

As a homeowner, it is important you realize the risk provided to you if you have multiple appliances in your home. In Miami, it is best that you speak with an electrician in Miami to understand the electrical capabilities currently existing in your home. A Miami electrician will have guidance and tips on how to overcome common pitfalls that homeowners make. Here are three common causes for power outages in residential homes:

1. Faulty Generator: If your home is older, it may be beneficial to upgrade your generator to support more power. If you are able to do this, you will find that you have the potential to upgrade your appliances across the board because your home will be able to support the increased electricity use.

2. Power Strip with Too Much Plugged In: If you have a power strip that has your computer, washer, and everything else plugged in, it will not be able to handle it. It is best to space these power strips equally around your home so that there are no power issues.

3. Neighborhood Power Outages: At times, the power outage that home owner experiences is not related to their own fault. It is important to understand that a street block or entire neighborhood may experience power outages. Having preparations in place when these occur is a wise decision for the safety of your home.

It is important to understand that power outages are a reality that homeowners face. The key to understand these is to have preparations in place to avoid them whenever possible. This will allow you to be better prepared as a homeowner and eliminate the risk of power outages due to scenarios that could have been prevented by effective planning. Thus, be sure to understand the electrical systems in your home and you will likely save yourself many inconveniences due to power outages.

4 Ways to Benefit from Hiring an Electrician

June 5, 2017 popadmin

These days, there are many individuals that decide to not utilize electricians. For this reason, there are a plethora of issues that occur that create dangers in individual’s homes and businesses. If you are located in the greater Miami area, then it is highly recommended that you consult with an electrician in Miami in order to get specialized advice on how to make your home or business more safe. Additionally, by working with a Miami electrician, you will be able to receive multiple options to choose from. Here are four ways to benefit from hiring an electrician:

1. Expertise: Typically, electricians know their industry quite well. For this reason, they will be up-to-date on the latest trends in their industry. This will help you to innovate your property and make a major difference in the way that you manage your electrical use.

2. Innovative Suggestions: The electric industry is always changing. Having an electrician on standby will help you to keep your organization or home current with the best possible innovations within the industry.

3. Energy Saving Tips: Energy saving will help you to save a great deal of capital on your bill. An electrician will be able to provide you with useful energy saving tips.

4. Safety Advice: Safety advice is pivotal for electricians. Be sure that you take advantage of the safety knowledge that they have to give for their clients. Through doing so, you will feel a great deal more secure in the future.

It is essential that you hire an electrician to assist you with your home of business. If you are able to do so, you will experience many different benefits that will help your property to function more efficiently in the long term. Thus, it is wise to schedule a consultation with an electrician today. You will be elated that you did!